COMBO XR10 JUSTOCK G3 & G2.1 13.5T

XERUN XR10 JUSTOCK G3 ESC + JUSTOCK 3650SD G2.1 13.5T MOTOR COMBO 

Set contains: 

Hobbywing XeRun Justock 3650 SD G2.1 13.5T Sensored Brushless Motor (1 pcs) 

Hobbywing XeRun XR10 Justock G3 ESC (Black) (1 pcs) 

Built-in polarity protection 

One danger that all electrical systems face is a reversed polarity from the power source. This can be caused by a short circuit, or usually, incidentally reversing the terminals. The XR10 Justock is integrated using MOSFET. If the battery terminals are connected in reverse, the MOSFET will be reverse-biased and will not allow current to flow through the system. 

Built-in capacitor module 

The built-in capacitor module eliminates the need for external capacitors and unwanted space. 

RPM speed limit function 

The ESC is able to support up to 6 different speed (RPM) selections to meet the needs and demands of various competitions in the world. It can be programmed through using the latest OTA Bluetooth module or the traditional 3in1 program box. 

Zero timing competition design 

The internal timing of the ESC is fixed at 0 degrees and cannot be adjusted. It is specifically built for zero timing races around the world. 

Built-in BEC supporting high-voltage steering gear 

The ESC has a built-in BEC which can support a maximum output current of up to 8A and the output voltage at either 6V or 7.4V. This will ensure constant power supplied to today s high-torque servos in the market. 

User-friendly and convenient for set-up 

The ease of having a dedicated programming port eliminates the trouble of plugging and unplugging the cable to the receiver. In addition, the interface can power additional fans to further dissipate heat. The user-friendly interface allows for easy and convenient setup by simply connecting the 3in1 LCD programming box or OTA Bluetooth module to the dedicated programming port. 

Justock XR10 ESC Specifications: 

Type: 1/10 Brushless Sensored 

Waterproof: No 

Cont./Peak Current: 60A/380A 

Input Voltage: 2S LiPo 

BEC Output: 6V/7.4V @4A 

Input Wires: 14AWG-200mm 

Output Wires: 14AWG-200mm 

Input Connectors: No 

Output Connectors: No 

Fan Size: 25x25x10mm 

SET Button on ESC: Supported 

LED Program Box: Supported 

LCD Program Box: Supported 

WiFi Module: Supported 

OTA Programmer: Supported 

Programming Port: Separate 

Firmware Upgrade: Supported 

Size: 40.9x33.9x32.1mm 

Weight: 75.4g (w/Wires) 

Applications: SL BL Motors / SD BL Motors 

Vehicles: 1/10 Touring Cars & Buggies for Stock Racing 

KV Rating/T Count: ≥10.5T 3650 Motor 

XeRun Justock 3650 SD G2.1 Motor 

Great Construction 

The use of a heat-resistant magnet attached aluminum case and double insulated windings, high precision & strength bearings, and rotor with a strong structure guarantees outstanding performance and super durability. 

Cool Look & Good Heat-dissipation 

The aluminum case (different from the Justock 3650 G1 s iron case) with a unique design not only creates a cool look but helps to dissipate heat. 

Linear & Smooth Control 

The built-in Hall sensor non-adjustable end bell combined with a high precision and balanced rotor guarantees the user a smooth and linear power on demand. 

13.5T Specifications: 

KV (no load): 3200 

LiPo: 2-3S 

Resistance: 0.027Ù 

No-Load Current: 4A 

Max Output @ 7.4V: 215W 

Current @ max output: 65A 

Poles: 2 

Stock Rotor: ø7-12.5 

Weight: 175 g 

Motor Dimensions: 

Diameter: 35.9 mm 

Length: 52.5 mm 

Shaft: 

Diameter: 3.17 mm 

Length: 15 mm