FUTABA 10PX RADIO W/ R404SBS-E RECEIVER

Futaba T10PX Radio System F-4G/T-FHSS/S-FHSS with R404SBS-E Diversity Receiver 

Futaba's high-end model 7PX series for cars & boats, which is favored by many of the world's top drivers. Taking over that DNA, a new "T10PX" was born. 

With the new communication F-4G, the maneuvering feeling recognized by the world champion has improved! Furthermore, telemetry communication, which was not possible with T-FHSS SR communication, can now be used. With the new function "Feeling", it feels like it suits each driver! Supports up to 10 channels that firmly catch the hearts of scale enthusiasts. Please enjoy Futaba's highest grade model on the circuit. 

Lightest in class & high balance design 

High-speed response F-4G new system installed 

"Feeling" - New response adjustment function 

Supports up to 10 channels 

Wide viewing angle full-color LCD adopted 

Menu icon adopted 

Can be used as a game controller by adopting a USB external output terminal 

New wheel unit / APA / APA angler / trigger adopted 

Throttle and steering spring replacement mechanism adopted 

New shape multi-position grip rubber 

Paddle shift lever switch + bottom switch + 3 position switch adopted 

Supports left-handed specifications 

T10PX Functions Overview: 

Full color touch screen 

LCD T10PX has an HVGA 4.3 inch, full-color, backlit LCD touch screen. The screen is transflective which enables both indoor and outdoor visibility. 

F-4G system & telemetry 

The 10PX is equipped with an F-4G system that enables telemetry with faster response than the T-FHSS SR system. 

SR Mode (Super Response) 

Equipped with SR mode, which has a significantly improved response compared to conventional. SR servo is required to use SR mode. 

10 channels Up to 10 channels can be operated by using the S.BUS2 system together. 

T-FHSS MINIZ system 

By setting to the MINIZ system in the receiver setting menu, you can use Kyosho Mini - Z Evo dedicated receiver RA-42. Dedicated receiver RA-42 requires purchase separately. 

Update-able software 

The software can be updated by microSD card. Model data can also be saved in a microSD card. In addition, telemetry log data can be saved. 

Model memory for 40 models 

Model names can use up to 15 letters, numbers, and symbols, so that logical names may be used. A model memory with different setups can be created by using the model copy function. 

Paddle switch + bottom switch + 3 position switch 

A paddle switch near the wheel, a 3-position switch on the grip, and a bottom switch on the bottom are equipped to support multiple channels and functions. 

Lipo battery can be used 

The optional LT2F2000B Lipo battery can be used as the transmitter power supply. The running time is extended. 

Brake mixing for large-scale cars 

Brake mixing of the front and rear wheels of 1/5GP and other large cars can be adjusted independently. Steering mixing Smooth cornering is possible by the independent left and right steering servo setting. 

4WS mixing for crawlers and other 4WS type 

This function can be used with crawlers and other 4-wheel steering type vehicles. Dual ESCs mixing for crawlers ESC at the front and rear are controlled independently. Gyro mixing The sensitivity of Futaba car rate gyros can be adjusted from the T10PX. Tank mixing This function is intended for vehicles such as tanks. 

CPS mixing 

LED lighting and flashing control using our CPS-1 channel power switch can be matched to steering and throttle operation by switch only. 

S.BUS servo 

This is a special function that allows setting of the parameters of our S.BUS servo whose settings are changed by using PC Link software. 

MC-Link 

This is a dedicated function which allows setting of the contents of the Link software which makes possible Futaba speed controller (ESC), MC960CR, MC950CR, MC850C, MC851C, MC602C, MC402CR, etc. variable frequency and other data changes by PC at the T10PX. 

Throttle Speed 

Sudden trigger operation on a slippery road surface will only cause the tires to spin and the model to not accelerate smoothly. By setting the throttle speed function, operation can be performed smoothly and easily. It also suppresses battery consumption. 

Steering Speed 

When you sense that the steering servo is too fast, etc., the servo operating speed (direction that suppresses the maximum speed) can be adjusted. 

Non-telemetry LED 

When the telemetry function is OFF to confirm that the telemetry function is not operating. 

Dial select function 

This function assigns functions to dials (digital trim, grip dial, knob). The step amount and operating direction can also be adjusted. Trim positioning at each model call is unnecessary because all the dials are digital. 

Switch select function 

This function assigns functions to 10 switches. The operating direction can also be set. 

Wheel & Trigger position can be changed 

The wheel position can be offset by using an accessory APA wheel position offset adapter. 

The wheel angle can also be adjusted. 

The position of the throttle trigger can be moved forward and backward. 

Left handed position is supported 

Rubber Grip 

It is possible to convert to a narrow grip type by exchanging the rubber grip. 

Trim/dial lock functions 

Lock functions which prohibit setting and operation by transmitter trim, and dials are provided. 

Left-handed support 

The left and right installation direction of the wheel section can be reversed. Vibrator built into the grip The vibrator can be operated at racing timer lap navigation, time-up, and low battery, telemetry alarm. It sets it on each function screen. 

USB port 

The transmitter can be used as a game controller by connecting it to a computer with a USB cable. (Some games cannot be used.) 

Included*: 

T10PX Transmitter 

R404SBS-E Receiver (EP cars) 

Dry battery holder (Installed in transmitter) 

Wheel offset adapter two size (APA) 

APA Mounting screws (Spare screws are also included) 

Wheel adapter 32 deg 

Wheel Angle spacer 5 deg 

Large diameter steering wheel 

Trigger guard (Lx1 / Rx1) 

Grip rubber x1 

Blind paddle x2 

Hex wrench 

Short printed manual (Full manual only as PDF - click on the download tab to download) 

*The contents of the set can change 

Specifications - T10PX Transmitter: 

Wheel system, 10 channels (F-4G System), 7 channels (SFHSS System), 4 channels (TFHSS-SR, T-FHSS systems) 

Transmitting frequencies 2.4GHz band 

Transmitting RF power output: 100 mW EIRP 

Futaba F-4G/T-FHSS SR/T-FHSS/MINI-Z T-FHSS/S-FHSS 

Transmitting antenna 1/2ëdipole 

4.3 inch backlighted color TFT liquid crystal touch panel. 

*When you turn on your 10PX, bright dots may appear on your screen display. Your display contains an extremely large number of TFT and is manufactured using high-precision technology. Any bright dots that may appear on your display are intrinsic of the TFT manufacturing technology. 

Specifications R404SBS-E (Included - for Electric Cars Only): 

Receiving frequency: 2.4GHz band 

Telemetry Receiver RF power output: 2.2 mW EIRP 

Power requirement: 3.7 V~7.4 V battery (Dry cell battery cannot be used.) 

System: F-4G system/S.BUS2 system 

Size: 25.5x20.7x10.6mm (includes a 30.5mm high antenna housing) 

Weight: 7.2g 

Specifications R404SBS Receiver (Optional): 

Receiving frequency: 2.4GHz band 

Telemetry Receiver RF power output: 1.02 mW EIRP 

Power requirement: 3.7 V~7.4 V battery (Dry cell battery cannot be used.) 

System: F-4G system/S.BUS2 system 

Size: 25.5x20.7x10.6mm 

Weight: 5.7g 

Usable sensor options (As of October 2021): 

Temperature sensor (SBS-01T) Perfect for engine head, etc. 

Temperature sensor (SBS-01TE) Used by attaching to a motor, etc. 

RPM Sensor (SBS-01RM) Measures speed over the 360 to 100,000rpm range. 

Brushless type RPM Sensor (SBS-01RB) Measures speed over the 360 to 300,000rpm range. 

Voltage Sensor (SBS-01V) Measures external power supply voltages up to 100V. 

Current sensor (SBS-01C) Measures external power supply voltages up to 70V, capacity and consumption capacity 

GPS sensor (SBS-01/02G) Detect the GPS and measure the position and speed of the car body. 

Compatibility with non-Futaba sensors (Castle TL0). (Refer to the sensor instruction manual for more information.) 

System Type: 

F-4G 

T-FHSS 

T-FHSS SR 

T-FHSS (Mini-Z) 

S-FHSS 

Hardware: 

LCD: 4.3" TFT-LCD WQVGA (wide viewing angle) 

LED: Blue 

Sound: Speaker / Earphone Jack 

Vibrator: Yes 

Switch: 7x Push switch, 1x Push lock switch & 1x Slide switch 

Trim: 6x Digital trim & 1x Dial trim 

Edit Key: Touch panel & 4x Push switch 

Display Switch: Yes 

Wireless charger (option): Yes