ELCERAM NITRIDE 1/8 G1 ESC

ELCERAM Nitride 1:8 G1 Competition Offroad & Onroad Brushless ESC 

The NITRIDE 1/8 is a new-generation electronic speed controller for sensorless brushless DC motors. Thanks to advanced cooling technology based on an aluminium nitride ceramic heat sink, the NITRIDE 1/8 offers excellent thermal conductivity and can be used with high-performance motors up to 2800 kV. 

The NITRIDE 1/8 offers revolutionary real-time monitoring of battery current and discharge, as well as innovative intelligent algorithms to protect the speed controller in the event of motor failure or mechanical problems. The NITRIDE 1/8 features reverse polarity protection. 

The NITRIDE 1/8 is fitted with a matt TFT LCD colour display; no additional interface is required. Settings can be easily adjusted using three buttons on the display. 

Programmable parameters and functions: 

Revolutionary simple Rx calibration. 

Real-time monitoring: battery voltage, ESC and motor temperatures, motor diagnostics and more. 

Revolutionary monitoring of battery current and discharge. 

Pre-race diagnostics: motor temperature, sensor cables, faulty motor, battery, BEC voltage and more. 

Simple programming: throttle, brake, boost and turbo timing, Hall angle and many other functions. 

Recording of race data, temperature and other waveforms, histograms and more. Data is saved after the ESC is switched off. 

Adjustable maintenance reminder for easy checking. 

No programming interface required. 

Firmware update function. 

Key features: 

TFT colour LCD display, matt The colour LCD display with a resolution of 160 x 80 pixels allows you to set all parameters and view all data directly on the ESC, without the need for a programming card or a mobile app. Everything you need is in the ESC. 

Operation is child s play with just 3 buttons, you can quickly set everything you need, and a single glance is enough to check all the parameters required for the race. Simple. Fast. Precise. 

Easy checking and adjustment The display gives you an overview of all key data and events before, during and after the race. You can quickly change your settings and receive immediate feedback, without the delay caused by connecting an external control interface. 

Advanced cooling technology NITRIDE features advanced cooling technology based on an aluminium nitride heat sink developed specifically for NITRIDE, which gives the ESC excellent thermal conductivity as well as long-term resistance to high temperatures and stresses. 

The MOSFET transistors are cooled directly, without an additional thermal resistance layer! 

During manufacture, ELCERAM uses very thick layers of special materials such as silver and copper to achieve very low internal resistance, as well as the latest technologies inspired by advanced power systems developed and manufactured by ELCERAM. 

For even better cooling, the NITRIDE 1/8 features additional aluminium cooling fins. If required under specific conditions, the NITRIDE 1/8 is fitted with pre-drilled mounting holes for installing a fan, as well as a connector for a smart 25 mm fan. 

Reverse polarity protection. 

Smart algorithms to protect the ESC. 

Easy installation fitting the NITRIDE 1/8 is quick and simple: it can be attached to the chassis using double-sided adhesive tape (included) or screwed directly into a suitable position, ideally one with good thermal conductivity. 

Furthermore, the ESC cover, featuring the display and buttons, can be easily replaced in the event of an accident. 

Technical specifications: 

Type: 1/8 on-road and off-road, brushless, with sensors 

Waterproof: No 

Reverse polarity protection: Yes 

Continuous/peak current: 220 A / 1500 A 

Input voltage: 2S 4S LiPo 

Adjustable BEC output voltage: 6.0 8.4 V 

BEC current (continuous/peak): 6 A/15 A 

Adjustable fan output voltage: 6.0 8.4 V 

Fan output current (continuous): 3 A 

Dimensions: W 43 x L 50 x H 28 mm 

Weight: 112 g without cables 

BEC cable length: 300 mm; the grey stripe indicates the negative terminal 

Application range: Sensor-based brushless DC motors, max. 2800 kV 

Zero-timing (Blinky mode) is supported. 

External capacitors required (included) 

Contents: 

NITRIDE 1/8 ESC 

AWG10 cable 

2 external capacitors 

25 mm ELCERAM fan 

Double-sided adhesive tape 

ELCERAM sticker