HOBBYWING XERUN XR10 JUSTOCK G3 60A ESC

Hobbywing XeRun XR10 Justock Black Esc G3 60A 

Built-in polarity protection 

One danger that all electrical systems face is a reversed polarity from the power source. This can be caused by a short circuit, or usually, incidentally reversing the terminals. The XR10 Justock is integrated using MOSFET. If the battery terminals are connected in reverse, the MOSFET will be reverse-biased and will not allow current to flow through the system. 

Built-in capacitor module 

The built-in capacitor module eliminates the need for external capacitors and unwanted space. 

RPM speed limit function 

The ESC is able to support up to 6 different speed (RPM) selections to meet the needs and demands of various competitions in the world. It can be programmed through using the latest OTA Bluetooth module or the traditional 3in1 program box. 

Zero timing competition design 

The internal timing of the ESC is fixed at 0 degrees and cannot be adjusted. It is specifically built for zero timing races around the world 

Built-in BEC supporting high-voltage servos 

The ESC has a built-in BEC which can support a maximum output current of up to 8A and the output voltage at either 6V or 7.4V. This will ensure constant power supplied to today s high-torque servos in the market. 

User-friendly and convenient for set-up 

The ease of having a dedicated programming port eliminates the trouble of plugging and unplugging the cable to the receiver. In addition, the interface can power additional fans to further dissipate heat. The user-friendly interface allows for easy and convenient setup by simply connecting the 3in1 LCD programming box or OTA Bluetooth module to the dedicated programming port. 

Single programming and RESET design button 

The ESC is designed with a single built-in SET button. Calibrating or doing a factory-reset can be achieved by using this SET button. Simple and easy to use. 

Supports ESC firmware upgrade 

Hobbywing engineers are constantly innovating and pushing the limits of its products. Enjoy the latest functions by upgrading to the latest firmware. Simply connect the ESC using either the HW LINK App via the OTA Bluetooth module or the USB LINK software through the computer. 

Specifications: 

Scale: 1/10 

Sensored, Brushless 

Waterproof: No 

Cont./Peak Current: 60A/380A 

Input Voltage: 2S LiPo 

BEC Output: 6V/7.4V @4A 

Input Wires: 14AWG-200mm 

Output Wires: 14AWG-200mm 

Input Connectors: No 

Output Connectors: No 

Fan Size: 25x25x10mm 

Fan Output Wires: 5-7.4V 

Fan Input Connectors: Powered by BEC 

SET Button on ESC: Supported 

LED Program Box: Supported 

LCD Program Box: Supported 

WiFi Module: Supported 

OTA Programmer: Supported 

Programming Port: Separate 

Firmware Upgrade: Supported 

Size: 40.9x33.9x32.1mm 

Weight: 75.4g (w/Wires) 

Applications: Sensorelss BL Motors / Sensored BL Motors 

Vehicles: 1/10 Touring Cars & Buggies for Racing 

KV Rating/T Count: ≥10.5T 3650 Motor