COMBO XR10 JUSTOCK G3S & G2.1 17.5T

XERUN XR10 JUSTOCK G3S ESC + JUSTOCK 3650SD G2.1 17.5T MOTOR COMBO 

The XR10 Justock G3S has precise control and powerful performance. It is suitable for 1/10 on-road and off-road zero-timing (blinky) competitions. 

Fan intelligent start and stop function 

When the ESC temperature is low, the fan does not activate, when the ESC temperature reaches the preset value, the fan automatically turns on. 

The intelligent start and stop function of the fan not only reduces noise, saves power, but also ensures that the ESC works in a good temperature range. 

Freewheeling Feature 

With the freewheeling function turned-on, the ESC temperature is lower, the vehicle decelerates faster when the throttle input is off, and it has better controllability around the corners. 

Multi RPM limit, select as needed 

Supports 79RPM Limits£¨10000-88000RPM£©RPM limit value selection. It can be programmed through the LCD programming box or OTA module. It is simple and convenient to meet the RPM limit requirements of various competitions in the world. 

Built-in capacitor module, optimized layout 

The built-in capacitor module eliminates the need for external capacitors and unwanted space. 

BEC 

The ESC has a built-in BEC which can support a maximum output current of up to 4A. The output voltage at either 6 or 7.4V. This will ensure constant power supplied to todays high-torque servos in the market. 

Built-in data logging function 

The ESC has a built-in data recording function. making it easy to obtain the operating status. 

The logged data includes: 

Minimum voltage 

Maximum ESC temperature 

Maximum current 

Maximum motor temperature 

Maximum RPM 

Wireless connection for data recording and analysis 

After the ESC is connected to the OTA Bluetooth module, connect to the ESC through the HW Link mobile app and turn on the real-time data recording function. You can view data such as throttle, voltage, current, temperature, speed, etc. in real time. In addition, OTA can record the above data using HW Link. Easy to implement data analysis functions. 

Note: Due to the Bluetooth transmission distance, the effective distance is about 5m! 

Specs: 

Type: Brushless, Sensored 1/10 ESC 

Cont./Peak Current: 60A/380A 

Input Voltage: 2S LiPo 

BEC Output: 6V/7.4V @ 4A 

Input Wires: 14AWG-200mm 

Output Wires: 14AWG-200mm 

Input Connectors: No 

Output Connectors: No 

Fan Size: 25x15x10mm 

Fan Output Wires: 5-7.4V 

Fan Input Connectors: BEC 

Firmware Upgrade: Supported 

Size: 40.9x33.9x32.1mm 

Weight: 75.4g 

Applications: Sensorless BL Motors / Sensored BL Motors 

Vehicles: 1/10 On-road and Off-road club competition and normal training 

KV Rating/T Count: ¡Ý10.5T 3650 Motor 

ESC Programing via: 

SET Button on ESC: Not Supported 

LED Program Box: Not Supported 

LCD G2 Program Box: Supported 

LCD Box Pro: Supported 

OTA Programmer: Supported 

Programming Port: Separate 

Motor Specs: 

Type: 1/10, Brushless Sensored 2-pole Stock 

KV Rating: 2450 (17.5T) 

LiPo Cells: 2-3S (2S only in this combo) 

No-load Current: 3.5A 

O.D.: 35.9mm 

Length: 52.5mm 

Shaft Diameter: 3.17mm 

Weight: 175g 

Front Bearing: OD9.525xID3.175xT3.967mm 

Rear Bearing: OD9.525xID3.175xT3.967mm 

Timing: Fixed 

Applications: STOCK/SPORT class (choose the motor as per competition rules) of 1/10 On-road (i.e. competition touring car or drift, F1, Mini car, and etc.) and Off-road (i.e. buggy, 2WD SCT & truck) racing, Normal Training, and Rock Crawlers (21.5T & 25.5T only).